Welcome to the CHICKEN Scheme pasting service
Chick on a Riscv added by Irvise on Wed May 12 20:26:38 2021
SDRAM init
Mem test .. pass
Flash ID : 0x17
OpenSBI copy
U-Boot copy
Image check .. pass
VGA init
Configuring MDIO
control (old): 0000
control (new): 0000
OpenSBI boot
OpenSBI v0.8
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : VexRiscv SMP SaxonSOC
Platform Features : timer,mfdeleg
Platform HART Count : 4
Boot HART ID : 1
Boot HART ISA : rv32imafds
BOOT HART Features : time
BOOT HART PMP Count : 0
Firmware Base : 0x80f80000
Firmware Size : 92 KB
Runtime SBI Version : 0.2
MIDELEG : 0x00000222
MEDELEG : 0x0000b101
U-Boot 2020.07-08304-gd361dd3997-dirty (Sep 09 2020 - 15:55:39 +0100)
DRAM: 32 MiB
MMC: spi@10020000:mmc@1: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@10010000
Out: serial@10010000
Err: serial@10010000
Net: No ethernet found.
Hit any key to stop autoboot: 0
7215304 bytes read in 11271 ms (625 KiB/s)
3988 bytes read in 25 ms (155.3 KiB/s)
## Booting kernel from Legacy Image at 80000000 ...
Image Name: Linux
Image Type: RISC-V Linux Kernel Image (uncompressed)
Data Size: 7215240 Bytes = 6.9 MiB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80ff0000
Booting using the fdt blob at 0x80ff0000
Loading Kernel Image
Using Device Tree in place at 80ff0000, end 80ff3f93
Starting kernel ...
[ 0.000000] Linux version 5.10.1 (fernando@linux.fritz.box) (riscv32-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.02.1-4-gaf4bd15ff0-dirty) 10.2.0, GNU ld (GNU Binutils) 2.35.2) #2 SMP Sat Apr 10 17:46:19 CEST 2021
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x0000000081ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000081ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000081ffffff]
[ 0.000000] SBI specification v0.2 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x8
[ 0.000000] SBI v0.2 TIME extension detected
[ 0.000000] SBI v0.2 IPI extension detected
[ 0.000000] SBI v0.2 RFENCE extension detected
[ 0.000000] SBI v0.2 HSM extension detected
[ 0.000000] riscv: ISA extensions adfim
[ 0.000000] riscv: ELF capabilities adfim
[ 0.000000] percpu: Embedded 12 pages/cpu s18700 r8192 d22260 u49152
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: rootwait console=hvc0 earlycon=sbi root=/dev/mmcblk0p2 init=/sbin/init mmc_core.use_spi_crc=0
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 23528K/32768K available (5322K kernel code, 567K rwdata, 931K rodata, 190K init, 260K bss, 9240K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 32 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c00000: mapped 32 interrupts with 2 handlers for 4 contexts.
[ 0.000000] random: get_random_bytes called from start_kernel+0x35c/0x4dc with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0xbfe27ab9a, max_idle_ns: 440795203754 ns
[ 0.000226] sched_clock: 64 bits at 52MHz, resolution 19ns, wraps every 4398046511097ns
[ 0.010649] Console: colour dummy device 80x25
[ 0.012857] printk: console [hvc0] enabled
[ 0.012857] printk: console [hvc0] enabled
[ 0.021031] printk: bootconsole [sbi0] disabled
[ 0.021031] printk: bootconsole [sbi0] disabled
[ 0.030547] Calibrating delay loop (skipped), value calculated using timer frequency.. 104.00 BogoMIPS (lpj=208000)
[ 0.040703] pid_max: default: 32768 minimum: 301
[ 0.050681] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.052939] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.101719] rcu: Hierarchical SRCU implementation.
[ 0.114281] smp: Bringing up secondary CPUs ...
[ 0.135985] smp: Brought up 1 node, 2 CPUs
[ 0.148946] devtmpfs: initialized
[ 0.211474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.214368] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.225108] NET: Registered protocol family 16
[ 0.577430] Advanced Linux Sound Architecture Driver Initialized.
[ 0.598372] clocksource: Switched to clocksource riscv_clocksource
[ 0.606832] simple-framebuffer 80e00000.framebuffer: framebuffer at 0x80e00000, 0x96000 bytes, mapped to 0x(ptrval)
[ 0.609767] simple-framebuffer 80e00000.framebuffer: format=r5g6b5, mode=640x480x16, linelength=1280
[ 0.713242] Console: switching to colour frame buffer device 80x30
[ 0.800318] simple-framebuffer 80e00000.framebuffer: fb0: simplefb registered!
[ 1.112062] NET: Registered protocol family 2
[ 1.129350] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 1.132744] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 1.135950] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 1.143127] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.151257] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.155949] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.167268] NET: Registered protocol family 1
[ 1.184905] RPC: Registered named UNIX socket transport module.
[ 1.187391] RPC: Registered udp transport module.
[ 1.188873] RPC: Registered tcp transport module.
[ 1.190932] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.224863] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[ 1.530741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.532787] io scheduler mq-deadline registered
[ 1.534735] io scheduler kyber registered
[ 1.540750] io scheduler bfq registered
[ 1.554983] spinal_lib_gpio 10000000.gpio: Probe success
[ 1.578500] spinal,lib-dmasg 10080000.dma: Probe success
[ 1.625243] 10011000.ttySpinal: ttySL0 at MMIO 0x10011000 (irq = 0, base_baud = 650000) is a Spinal lib UART
[ 1.673169] spi-nor spi0.0: w25q128 (16384 Kbytes)
[ 1.688082] 3 fixed-partitions partitions found on MTD device spi0.0
[ 1.690960] Creating 3 MTD partitions on "spi0.0":
[ 1.692724] 0x000000000000-0x000000400000 : "fpga_bitstream"
[ 1.707771] 0x000000340000-0x000000380000 : "opensbi"
[ 1.720774] 0x000000380000-0x000000400000 : "uboot"
[ 1.749831] ------------[ cut here ]------------
[ 1.752011] /apbA@10000000/spi@20000/spidev@2: buggy DT: spidev listed directly in DT
[ 1.766771] spinal-lib,spi-1.0 10020000.spi: base (ptrval)
[ 1.795985] libphy: Fixed MDIO Bus: probed
[ 1.800834] enc28j60 spi0.3: Ethernet driver 1.02 loaded
[ 1.819241] enc28j60 spi0.3: chip not found
[ 1.821127] enc28j60: probe of spi0.3 failed with error -5
[ 1.843726] spinal_lib_mac 10040000.mac eth0: irq 3, mapped at a0407000
[ 1.852430] i2c /dev entries driver
[ 1.896161] mmc_spi spi0.1: SD/MMC host mmc0, no WP, no poweroff, cd polling
[ 1.919172] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.965054] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.968285] mmc0: new SDHC card on SPI
[ 1.976373] spinal,lib-audio-out 10094000.audio_out: Probe success
[ 1.986957] mmcblk0: mmc0:0000 SA32G 28.9 GiB
[ 2.027674] NET: Registered protocol family 10
[ 2.035322] mmcblk0: p1 p2
[ 2.063827] Segment Routing with IPv6
[ 2.067842] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.090740] NET: Registered protocol family 17
[ 2.104410] i2c-gpio i2cA: using lines 504 (SDA) and 505 (SCL)
[ 2.112972] ALSA device list:
[ 2.114785] #0:
[ 2.220713] VFS: Mounted root (ext2 filesystem) readonly on device 179:2.
[ 2.264695] devtmpfs: mounted
[ 2.269774] Freeing unused kernel memory: 188K
[ 2.271747] Kernel memory protection not selected by kernel config.
[ 2.273774] Run /sbin/init as init process
[ 10.113085] EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Initializing random number generator: OK
Saving random seed: [ 13.688432] random: dd: uninitialized urandom read (512 bytes read)
OK
Starting haveged: haveged: command socket is listening at fd 3
OK
Starting network: udhcpc: started, v1.33.0
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: no lease, failing
FAIL
Starting dropbear sshd: OK
Welcome to Buildroot
buildroot login: root
___ ___ ___ ___
o O O / __| __ _ __ __ ___ _ _ ___ / __| / _ \ / __|
o \__ \ / _` | \ \ / / _ \ | ' \ |___| \__ \ | (_) | | (__
TS__[O] |___/ \__,_| /_\_\ \___/ |_||_| _____ |___/ \___/ \___|
{======|_|"""""|_|"""""|_|"""""|_|"""""|_|"""""|_| |_|"""""|_|"""""|_|"""""|
./o--000'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'"`-0-0-'
root@buildroot:~# cat /proc/cpuinfo
processor : 0
hart : 1
isa : rv32imafd
mmu : sv32
processor : 1
hart : 0
isa : rv32imafd
mmu : sv32
root@buildroot:~# csi
CHICKEN
(c) 2008-2021, The CHICKEN Team
(c) 2000-2007, Felix L. Winkelmann
Version 5.2.1 (rev ea32b1d0)
linux-unix-gnu-riscv [ 32bit dload ptables ]
Type ,? for help.
#;1> ,r
Features:
32bit chicken chicken-5
chicken-5.2 csi dload
full-numeric-tower gnu
linux little-endian ptables
riscv srfi-0 srfi-11
srfi-12 srfi-15 srfi-16
srfi-17 srfi-2 srfi-23
srfi-26 srfi-28 srfi-30
srfi-31 srfi-39 srfi-46
srfi-55 srfi-6 srfi-6
srfi-61 srfi-62 srfi-8
srfi-87 srfi-88 srfi-9
unix
Machine type: riscv (32-bit)
Software type: unix
Software version: linux
Build platform: gnu
Installation prefix: /usr
Extension installation location: /usr/lib/chicken/11
Extension path: (/usr/lib/chicken/11)
Include path: (/usr/share/chicken)
Keyword style: suffix
Symbol-table load: 0.8
Avg bucket length: 1.44
Total symbol count: 2416
Memory: heap size is 786432 bytes with 193760 bytes currently in use
nursery size is 262144 bytes, stack grows downward
Command line: ("csi")
interrupts are enabled
#;1> (print "Hello RISC-V!")
Hello RISC-V!
#;2> ,q
root@buildroot:~#